This chapter is from the book
This chapter is from the book
This chapter is from the book
Agent Kits
Agents are initially installed on endpoints via an executable install file. You can download and install this file directly from the CSA MC itself from an SSL-protected web page. Other methods of installation include locally executing the EXE file manually or via many other scripted and automated installation procedures such as an enterprise software installation system.
Creating an Agent Kit
Before you can install an agent kit on a workstation, you must accomplish a few tasks. First you must create the appropriate initial modules, policies, and rules that the agent will use. Then you must define the group and attach policies to it. Then you must create the agent kit and define a few installation kit parameters. This section describes these tasks and explains the options along the way.
|
Step 1 |
Choose System > Agent Kits from the navigation bar. This brings you to a view of all the currently available kits. (There are pre-installed agent kits available.) See Figure 6-1. |
|
Step 2 |
Click New. |
|
|
Figure 6-1 Available Agent Installation Kits |
|
Step 3 |
When prompted with the What Is Your Target Architecture? pop-up window, choose the appropriate platform. In this example, choose Windows. |
|
Step 4 |
Create a name and description that is appropriate to this agent kit, as shown in Figure 6-2. |
)
)
Figure 6-2 Agent Kit Creation |
|
|
Step 5 |
Choose the appropriate groups that will be associated with this installation kit. You may choose more that one group if necessary. |
|
Step 6 |
Choose whether this should be a quiet install. Both the quiet and nonquiet installs need to be executed on the local machine either manually or via a scripted or automated method; however, when you choose Quiet Install, the user is not prompted during the installation for options such as installing the network shim or rebooting after installation. |
|
Step 7 |
(Optional) If you choose Quiet Install, you can then select to install the network shim or reboot automatically after the installation completes. |
|
Step 8 |
(Optional) Choose whether you want to install the Cisco Trust Agent (CTA), which is part of the Cisco Self-Defending Network Initiative. CTA can query the CSA for information about the local workstation, such as installed hotfixes and service patches as well as some state information about the CSA itself. If you do opt to load CTA, you can include information regarding its initialization as well as CTA certificate information that is used to secure the CTA Extensible Authentication Protocol (EAP) session to the Cisco Secure Access Control Server (ACS). Finally, under CTA, you can opt to state whether the CTA should be uninstalled if the CSA is ever uninstalled. |
|
Step 9 |
After you have configured the kit to your liking, click Make Kit. |
Upon completion of your agent kit creation, a confirmation screen displays summarizing the selections you made during the creation process. (See Figure 6-3.) You are also reminded that the kit is not ready for deployment until after the next rule generation has been performed. You can perform a generation at this time if you are ready to proceed.
)
Figure 6-3 Agent Kit Confirmation Screen
To Shim or Not to Shim?
With regard to the CSA operation and ability to protect a host, the network shim provides the following capabilities:
- Port scan detection
- SYN flood protection
- Malformed packet protection
Now, you may say, "I want all of that. Why would I not load the network shim with every agent kit?" Good question! The reason is that other network shims might already be loaded on the workstation. These other network shims typically take the form of VPN or personal firewall software. Quite often, these shims can conflict and cause problems with endpoint operation. The solution is to either not load the CSA network shim or remove the other software that is in conflict.
Disabling the network shim does not stop network access control rules from running; it only stops the network hardening features from being active, such as SYN flood protection and port scan detection. As a best practice, it is advisable to continue to use the network shim on Internet-facing servers or systems that might be targeted by such attacks as listed previously. Servers do not tend to use the type of software that conflicts with the network shim provided by the CSA, and you would therefore have few conflicts to resolve in this case. Desktop and laptop systems regularly use applications that could conflict, and you should cautiously test the shim on these systems to prevent unnecessary outages. Because desktop systems are not often targeted for denial-of-service (DoS) attacks, these preventive and alerting mechanisms in the shim can often be better served by well-placed network IDS sensors.
Installing Agent Kits
Agent kits, once created, still need to be installed on the remote systems you are attempting to protect. The installation package created varies according to the intended operating system architecture onto which it will be loaded. The installation procedures vary between the Windows, Linux, and Solaris implementations of the product. The next few sections cover the installation processes and procedures necessary to successfully load the agent on these systems.
Installing a Windows Agent Kit
After you have created the Windows agent kits, they are ready for installation. First look at how the remote endpoints can install the software directly from an SSL-protected web page on the CSA MC. Perform the following tasks on the endpoint:
|
Step 1 |
Open a web browser and go to the following URL: |
|
|
https://ciscoworks_system_name/csamc45/kits |
|
|
The web page that displays, as seen in Figure 6-4, provides a listing of all agent kits on this CSA MC server. |
)
Figure 6-4 Available Agent Kits Page |
|
|
|
To view this URL and register with this particular CSA MC server, you must be allowed to do so as defined in the Registration Control settings on the CSA MC, as shown in Figure 6-5. To access this page, choose Systems > Registration Control. |
|
Step 2 |
From the Cisco Security Agent Kits page, choose the kit you want to install by clicking the link. You must have local administrator rights to install the kit. |
|
Step 3 |
You are prompted to save the installation file. Click Save and find a location that is appropriate for the file. |
|
Step 4 |
Close your browser and double-click the executable file you downloaded. The EXE is a self-extracting file. |
|
|
If the agent is performing a quiet install, no interaction occurs with the user, and all installation occurs without any input required from the user. If the agent is performing a nonquiet install, proceed with the following steps to complete the installation. |
|
|
Before the installation can continue, the agent installation kit verifies the user has local administrator rights; otherwise, a pop-up notification displays. |
|
Step 5 |
After clicking Next to proceed with the installation, read the license agreement, as shown in Figure 6-6. You are required to accept the license agreement to continue. |
)
Figure 6-5 Registration Control Page |
|
)
Figure 6-6 Installation License Agreement |
|
|
Step 6 |
Choose the installation path, as shown in Figure 6-7. The default installation directory is Program Files\Cisco Systems. The folder selected here becomes the location in which a CSAgent folder is created. All agent executables and other supporting files are placed in a directory hierarchy within the newly created CSAgent folder in the directory you select. |
)
Figure 6-7 Installation Directory Path |
|
|
Step 7 |
After you select the path, choose whether to install the network shim, as shown in Figure 6-8. |
Upon completing Step 7, a summary screen displays before final installation continues, as shown in Figure 6-9. After you verify that the summary information regarding the installation to be performed is correct, the actual agent installation begins, as shown in Figure 6-10.
After completing the installation, the system presents you with a reboot request. A reboot is not required for most agent functionality to become active; however, for a more detailed look at the functions available after a successful reboot, see the "Immediately Rebooting the System After Installation" section later in this chapter. Figure 6-11 shows a sample reboot request.
)
Figure 6-8 Choose Whether to Shim
)
Figure 6-9 Pre-Installation Summary Screen
)
Figure 6-10 Installation Begins
)
Figure 6-11 Reboot Request
As an alternative to sending the user to the URL that includes every possible agent kit, you can go back to the Cisco Security Agent Kits page and choose the specific kit you want the user to install. When this page opens, you will see a specific link that you can send to the user via e-mail or another method. This link is to the direct download for that kit and enables the user to install that specific agent kit when clicked. You are also given the Copy to Clipboard option, which places the specific link in your Windows clipboard so that you can craft an e-mail and then just paste the link into the message from your clipboard.
Installing a Solaris Agent Kit
The installation of a Solaris agent kit is a command-line process that requires the installer to be a super user on the system. To install a Solaris agent kit, retrieve the agent installation kit as per the Windows agent kit retrieval process described earlier or manually copy the kit from the CSA MC. Continue the installation process by unpacking the archive and installing the package to the default directory, which is /opt/CSCOcsa, using the following two commands on the Solaris system:
- tar xf CSA-Server_4.5.0.15-setup.tar
- pkgadd -a CSCOcsa/reloc/cfg/admin –d
To complete the Solaris installation process, verify the package to install is the intended package as per the system response that displays as a result of your command entry above and acknowledge that you want to continue the installation. Press q when the installation completes. Finally, reboot the system by typing shutdown -y i6 g0.
Installing a Linux Agent Kit
The installation of a Linux agent kit is a command-line process. To begin the process, you must first obtain the Linux agent kit file from the CSA MC. After retrieving the installation kit, you unpack the compressed agent kit using the following command entered at a com-mand prompt:
tar xvf CSAagent-4.5-51.i386.tar
You should now change directories to the CSCOcsa directory that was created during the unpacking process. This directory is the location from which you install the Red Hat Packet Manager (RPM). When in the correct directory, type the following to install the Linux RPM: ./install_rpm.
As an alternative to using the command-line installation procedure, you can use the graphical interface of Red Hat to download, extract, and install the CSA. (See Figure 6-12.)
)
Figure 6-12 Linux Agent Installation
Immediately Rebooting the System After Installation
Most CSA protective mechanisms take effect immediately after installation, even before a reboot. CSA is not fully functional, however, until a reboot has occurred. Here is a list of functionality that does not take effect until after a reboot:
- Network shield rules—Network shield rules are not applied until after a reboot. Network shield rules provide protective mechanisms that relate to the network shim.
- Buffer-overflow protection—Buffer-overflow protection is only enforced for processes that start after the installation is complete. The agent does not monitor any processes that were already running; however, it does monitor any new processes that are spawned by the already running process. For Linux/Solaris agents, buffer overflow protection is only in effect for new processes.
- Data access control rules—These rules are not applied to Uniform Resource Identifiers (URIs) until the web server is restarted. This pertains to Windows, Solaris, and Linux agents.
- COM component access control rules—COM rules, which are discussed in Chapter 4, "Understanding CSA Policies, Modules, and Rules," are not functional until the system restarts.
- Network access control rules (Solaris/Linux restriction only)—On Solaris and Linux, these rules only apply to new socket connections.
- File access control rules (Solaris/Linux restriction only)—Only newly opened files have these rules enforced.
Scripted Installation
As an alternative to the manual installation processes described previously for each operating system, you can install the CSA agent automatically via a script when the user logs in to the network. The CSA agent self-extracting EXE is located in %Program Files%\CSCOpx\CSAMC45\bin\webserver\htdocs\deploy_kits on the CSA MC server. You can move this file to an appropriate location and use it in scripts or other automated installation mechanisms. For a script to install the executable successfully, be sure to create the kit as a quiet install and with the appropriate options, such as network shim and automatic reboot.
Installing Software Updates
As with any software product, various software updates will become available for the CSA product over time. You should install these updates to add new functionality or provide fixes to CSA components. When you receive a new update to the CSA product, read the release and installation notes provided with the software update. When you are familiar with the reason for the update and the procedures necessary to complete the update, proceed with updating the CSA MC application. This update will also update the agent software that is available to the agents in the form of future agent kits or updates to currently deployed agent installations. To see a listing of the available software updates on the CSA MC, as shown in Figure 6-13, choose Systems > Software Updates from the navigation bar.
You can obtain the information regarding each update by following the link in the Name column. Figure 6-14 shows an example of the information that displays.
Currently, two different types of scheduled updates are available to CSA: automatic and manual. With automatic updates, an agent polls as expected, and as part of the transaction it receives and installs the updated software silently. Figure 6-15 shows a typical screen that displays in a CSA MC regarding scheduled software updates that have been configured for deployment.
)
Figure 6-13 Available Software Updates Page
)
Figure 6-14 Specific Available Update Information
)
Figure 6-15 Scheduled Updates Screen
With a manual update, the installation is not silent. The user is prompted to either install the update immediately or postpone the update for up to 10 days.
To configure a new update with parameters specific to your environment, follow these steps and refer to Figure 6-16:
|
Step 1 |
Choose Systems > Software Updates > Schedule Software Updates > New. |
|
Step 2 |
Provide a name and description for the update. |
|
Step 3 |
Choose the architecture the update will be targeting. |
|
Step 4 |
Choose the group or groups that will be required to install the update. |
|
Step 5 |
Choose a timeframe in which the updates will be available. By default, this is set to the entire day. If you edit this timeframe, the update will only be available during that window and no users can update outside of that timeframe even if they select Postpone at an earlier time and are now attempting to install via the button on the local GUI. |
|
Step 6 |
The last configurable option is choosing whether to make the update automatic. If you make the update automatic, users do not have the option to postpone the installation. |
)
Figure 6-16 Update Configuration Screen
Uninstalling an Agent Kit
If you want to script an uninstallation of a security agent, you can use a pre-installed Cisco-provided BAT file to aid in the process. On Windows systems, the script is csa_uninstall.bat and is located in the system32 directory. If you want to script the uninstall as a quiet uninstall, you should add a parameter to the BAT file. For an automated scripted quiet uninstallation, execute csa_uninstall.bat 3 in the agent's local system32 directory. You might need to disable any rules that relate to service control prior to attempting to uninstall the agent. A query rule could easily foil your attempt to script an uninstallation of the agent.
The process to uninstall an agent running on Solaris is also very simple. From the Solaris server, enter pkgrm CSCOcsa. This process can be stopped by agent control rules that might be active. Disable any of these preventive rules before attempting uninstallation.
Uninstalling the agent in Linux is also a command-line feature. Before you can proceed, you must make sure you have the correct version number and then type the following from a command line:
rpm -qf /opt/CSCOcsa/bin/csamanagerd CSAagent-4.5-56
When that completes, type the following:
rpm -ev CSAagent-4.5-56.i386
As always, if any rules would prevent agent installation, you must disable those first before proceeding.