- Building the Baseline Topology
- Operation and Evaluation/Troubleshooting
- Examining the Routing Table
- Alternative Topologies
- Summary
- Review Questions
Examining the Routing Table
You should also understand what the routing table will look like. All routes controlled by Mobile IP are marked with an M in the routing table. The Home Agent has two kinds of Mobile IP routes in its routing table, home networks and Mobile Nodes. If a home network is configured as a virtual network, it appears in the routing table as an M route; otherwise, it appears as a connected route. For each Mobile Node that has an active binding, you also find a host route in the routing table. As shown in Example 4-12, the Mobile Node route shows the tunnel that is being used as the next hop.
Example 4-12 Routing Table on the Home Agent
HA#show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B – BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set O 192.168.4.0/24 [110/20] via 192.168.1.1, 01:52:00, Ethernet0/0 O 192.168.5.0/24 [110/30] via 192.168.1.1, 01:52:00, Ethernet0/0 O 192.168.6.0/24 [110/30] via 192.168.1.1, 01:52:00, Ethernet0/0 C 192.168.1.0/24 is directly connected, Ethernet0/0 O 192.168.2.0/24 [110/20] via 192.168.1.1, 01:52:00, Ethernet0/0 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks M 192.168.100.10/32 [3/1] via 192.168.6.1, 01:51:55, Tunnel0 M 192.168.100.0/24 is directly connected O 192.168.3.0/24 [110/20] via 192.168.1.1, 01:52:00, Ethernet0/0
Example 4-13 looks at the routing table of the IS. The point of including the IS in the topology explored in this chapter is to show that only the home network route is redistributed. In Example 4-13, the virtual network appears as a Type 2 external OSPF route.
Example 4-13 Routing Table on the IS
IS>show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set C 192.168.4.0/24 is directly connected, Ethernet3/0 O 192.168.5.0/24 [110/20] via 192.168.3.2, 01:58:45, Ethernet2/0 O 192.168.6.0/24 [110/20] via 192.168.4.2, 01:58:45, Ethernet3/0 C 192.168.1.0/24 is directly connected, Ethernet0/0 C 192.168.2.0/24 is directly connected, Ethernet1/0 O E2 192.168.100.0/24 [110/20] via 192.168.1.2, 01:58:45, Ethernet0/0 C 192.168.3.0/24 is directly connected, Ethernet2/0