- Configure CA Support Tasks
- Task 1: Prepare for IPSec
- PIX CA Support Overview
- Task 2: Configure CA Support
- Task 3: Configure IKE
- Task 4: Configure IPSec
- Task 5: Test and Verify VPN Configuration
- Summary
- Review Questions
This chapter is from the book
This chapter is from the book
This chapter is from the book
Task 5: Test and Verify VPN Configuration
The last major task in configuring PIX Firewall IPSec is to test and verify the IKE and IPSec configuration accomplished in the previous tasks. This section summarizes the methods and commands used to test and verify the VPN configuration including CA, IKE, and IPSec configuration.
NOTE
Although many of the test and verify commands are used the same as when configuring preshared keys, there are some commands unique to RSA signatures.
Test and verify CA configuration with the commands in Table 7-3.
Table 7-3 Commands to Test and Verify CA Configuration
|
Command |
Description |
|
show ca identity |
Displays the CA your PIX Firewall uses |
|
show ca configure |
Displays the parameters for communication between the PIX Firewall and the CA |
|
show ca mypubkey rsa |
Displays the PIX Firewall's public RSA keys |
|
show ca certificate |
Displays the current status of requested certificates and relevant information of received certificates, such as CA and RA certificates |
Debug CA messages with the debug crypto ca command. This command displays communications between the PIX Firewall and the CA server.
Delete RSA keys and CA certificates with the commands in Table 7-4.
Table 7-4 Commands to Delete RSA Keys and CA Certificates
|
Command |
Description |
|
ca zeroize rsa |
Deletes all RSA keys that were previously generated by your PIX Firewall. If you issue this command, you must also enter the no ca identity command to delete CA certificates and ask the CA administrator to revoke your PIX Firewall's certificates at the CA. |
|
no ca identity |
Manually removes the PIX Firewall's certificates from the configuration; this command deletes all the certificates issued by the CA. |
Test and Verify IKE Configuration
Test and verify IKE configuration on the PIX Firewall with the commands in Table 7-5.
Table 7-5 Commands to Test and Verify IKE Configuration
|
Command |
Description |
|
show access-list |
Lists the access-list command statements in the configuration. Used to verify general access lists to permit IPSec traffic. |
|
show isakmp |
Displays configured ISAKMP policies in a format similar to a write terminal command. |
|
show isakmp policy |
Displays default and any configured ISAKMP policies. |
Test and Verify IPSec Configuration
Test and verify IPSec configuration on the PIX Firewall with the commands in Table 7-6.
Table 7-6 Commands to Test and Verify IPSec Configuration
|
Command |
Description |
|
show access-list |
Lists the access-list command statements in the configuration. Used to verify that the crypto access lists select interesting traffic. Displays number of packets that matched the access list. |
|
show crypto map |
Displays the configured crypto map parameters. |
|
show crypto ipsec transform-set |
Displays the configured IPSec transform sets. |
|
show crypto ipsec security-association lifetime |
Displays the correct global IPSec SA lifetime values. |
Monitor and Manage IKE and IPSec Communications
Monitor and manage IKE and IPSec communications between the PIX Firewall and IPSec peers with the commands in Table 7-7.
Table 7-7 Commands to Monitor and Manage IKE and IPSec Communications
|
Command |
Description |
|
show isakmp sa |
Displays the current status of ISAKMP SAs |
|
show crypto ipsec sa |
Displays the current status of IPSec SAs—useful for ensuring traffic is being encrypted |
|
clear crypto isakmp sa |
Clears ISAKMP SAs |
|
clear crypto ipsec sa |
Clears IPSec SAs |
|
debug crypto isakmp |
Displays ISAKMP (IKE) communications between the PIX Firewall and IPSec peers |
|
debug crypto ipsec |
Displays IPSec communications between the PIX Firewall and IPSec peers |