Home > Articles > Networking > Routing & Switching

Cisco Networking Academy's Introduction to Routing Concepts

Mar 20, 2014

📄 Contents

␡

⎙ Print

< Back Page 8 of 12 Next >

This chapter is from the book 

Routing Protocols Companion Guide

Learn More Buy

Routing Decisions (1.2)

The key to understanding the role of a router in the network is to understand that a router is a Layer 3 device responsible for forwarding packets. However, a router also operates at Layers 1 and 2.

Router Switching Function (1.2.1.1)

A primary function of a router is to forward packets toward their destination. This is accomplished by using a switching function, which is the process used by a router to accept a packet on one interface and forward it out of another interface. A key responsibility of the switching function is to encapsulate packets in the appropriate data link frame type for the outgoing data link.

After the router has determined the exit interface using the path determination function, the router must encapsulate the packet into the data link frame of the outgoing interface.

What does a router do with a packet received from one network and destined for another network? The router performs the following three major steps:

Step 1. De-encapsulates the Layer 3 packet by removing the Layer 2 frame header and trailer.
Step 2. Examines the destination IP address of the IP packet to find the best path in the routing table.
Step 3. If the router finds a path to the destination, it encapsulates the Layer 3 packet into a new Layer 2 frame and forwards the frame out the exit interface.

As shown in Figure 1-28, devices have Layer 3 IPv4 addresses and Ethernet interfaces have Layer 2 data link addresses. For example, PC1 is configured with IPv4 address 192.168.1.10 and an example MAC address of 0A-10. As a packet travels from the source device to the final destination device, the Layer 3 IP addresses do not change. However, the Layer 2 data link addresses change at every hop as the packet is de-encapsulated and re-encapsulated in a new frame by each router. It is very likely that the packet is encapsulated in a different type of Layer 2 frame than the one in which it was received. For example, an Ethernet encapsulated frame might be received by the router on a FastEthernet interface, and then processed to be forwarded out of a serial interface as a Point-to-Point Protocol (PPP) encapsulated frame.

Figure 1-28 Encapsulating and De-Encapsulating Packets

Send a Packet (1.2.1.2)

In the animation in the online course, PC1 is sending a packet to PC2.

PC1 must determine if the destination IPv4 address is on the same network. PC1 determines its own subnet by doing an AND operation on its own IPv4 address and subnet mask. This produces the network address that PC1 belongs to. Next, PC1 does this same AND operation using the packet destination IPv4 address and the PC1 subnet mask.

If the destination network address is the same network as PC1, then PC1 does not use the default gateway. Instead, PC1 refers to its ARP cache for the MAC address of the device with that destination IPv4 address. If the MAC address is not in the cache, then PC1 generates an ARP request to acquire the address to complete the packet and send it to the destination. If the destination network address is on a different network, then PC1 forwards the packet to its default gateway.

To determine the MAC address of the default gateway, PC1 checks its ARP table for the IPv4 address of the default gateway and its associated MAC address.

If an ARP entry does not exist in the ARP table for the default gateway, PC1 sends an ARP request. Router R1 sends back an ARP reply. PC1 can then forward the packet to the MAC address of the default gateway, the Fa0/0 interface of router R1.

A similar process is used for IPv6 packets. Instead of the ARP process, IPv6 address resolution uses ICMPv6 Neighbor Solicitation and Neighbor Advertisement messages. IPv6-to-MAC address mappings are kept in a table similar to the ARP cache, called the neighbor cache.

Forward to the Next Hop (1.2.1.3)

The following processes take place when R1 receives the Ethernet frame from PC1:

R1 examines the destination MAC address, which matches the MAC address of the receiving interface, FastEthernet 0/0. R1, therefore, copies the frame into its buffer.
R1 identifies the Ethernet Type field as 0x800, which means that the Ethernet frame contains an IPv4 packet in the data portion of the frame.
R1 de-encapsulates the Ethernet frame.
Because the destination IPv4 address of the packet does not match any of the directly connected networks of R1, R1 consults its routing table to route this packet. R1 searches the routing table for a network address that would include the destination IPv4 address of the packet as a host address within that network. In this example, the routing table has a route for the 192.168.4.0/24 network. The destination IPv4 address of the packet is 192.168.4.10, which is a host IPv4 address on that network.

The route that R1 finds to the 192.168.4.0/24 network has a next-hop IPv4 address of 192.168.2.2 and an exit interface of FastEthernet 0/1. This means that the IPv4 packet is encapsulated in a new Ethernet frame with the destination MAC address of the IPv4 address of the next-hop router.

Because the exit interface is on an Ethernet network, R1 must resolve the next-hop IPv4 address with a destination MAC address using ARP:

R1 looks up the next-hop IPv4 address of 192.168.2.2 in its ARP cache. If the entry is not in the ARP cache, R1 would send an ARP request out of its FastEthernet 0/1 interface and R2 would send back an ARP reply. R1 would then update its ARP cache with an entry for 192.168.2.2 and the associated MAC address.
The IPv4 packet is now encapsulated into a new Ethernet frame and forwarded out the FastEthernet 0/1 interface of R1.

The animation in the online course illustrates how R1 forwards the packet to R2.

Packet Routing (1.2.1.4)

The following processes take place when R2 receives the frame on its Fa0/0 interface:

R2 examines the destination MAC address, which matches the MAC address of the receiving interface, FastEthernet 0/0. R2, therefore, copies the frame into its buffer.
R2 identifies the Ethernet Type field as 0x800, which means that the Ethernet frame contains an IPv4 packet in the data portion of the frame.
R2 de-encapsulates the Ethernet frame.
Because the destination IPv4 address of the packet does not match any of the interface addresses of R2, R2 consults its routing table to route this packet. R2 searches the routing table for the destination IPv4 address of the packet using the same process R1 used.
The routing table of R2 has a route to the 192.168.4.0/24 network, with a next-hop IPv4 address of 192.168.3.2 and an exit interface of Serial 0/0/0. Because the exit interface is not an Ethernet network, R2 does not have to resolve the next-hop IPv4 address with a destination MAC address.
The IPv4 packet is now encapsulated into a new data link frame and sent out the Serial 0/0/0 exit interface.

When the interface is a point-to-point (P2P) serial connection, the router encapsulates the IPv4 packet into the proper data link frame format used by the exit interface (HDLC, PPP, etc.). Because there are no MAC addresses on serial interfaces, R2 sets the data link destination address to an equivalent of a broadcast (MAC address: FF:FF:FF:FF:FF:FF).

The animation in the online course illustrates how R2 forwards the packet to R3.

Reach the Destination (1.2.1.5)

The following processes take place when the frame arrives at R3:

R3 copies the data link PPP frame into its buffer.
R3 de-encapsulates the data link PPP frame.
R3 searches the routing table for the destination IPv4 address of the packet. The routing table has a route to a directly connected network on R3. This means that the packet can be sent directly to the destination device and does not need to be sent to another router.

Because the exit interface is a directly connected Ethernet network, R3 must resolve the destination IPv4 address of the packet with a destination MAC address:

R3 searches for the destination IPv4 address of the packet in its Address Resolution Protocol (ARP) cache. If the entry is not in the ARP cache, R3 sends an ARP request out of its FastEthernet 0/0 interface. PC2 sends back an ARP reply with its MAC address. R3 then updates its ARP cache with an entry for 192.168.4.10 and the MAC address that is returned in the ARP reply.
The IPv4 packet is encapsulated into a new Ethernet data link frame and sent out the FastEthernet 0/0 interface of R3.
When PC2 receives the frame, it examines the destination MAC address, which matches the MAC address of the receiving interface, its Ethernet network interface card (NIC). PC2, therefore, copies the rest of the frame into its buffer.
PC2 identifies the Ethernet Type field as 0x800, which means that the Ethernet frame contains an IPv4 packet in the data portion of the frame.
PC2 de-encapsulates the Ethernet frame and passes the IPv4 packet to the IPv4 process of its operating system.

The animation in the online course illustrates how R3 forwards the packet to PC2.

< Back Page 8 of 12 Next >

🔖 Save To Your Account

InformIT Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time.

Privacy Notice

Overview

Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information

To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information

Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security

Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children

This site is not directed to children under the age of 13.

Marketing

Pearson may send or direct marketing communications to users, provided that

Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
Such marketing is consistent with applicable law and Pearson's legal obligations.
Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information

If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out

Users can always make an informed choice as to whether they should proceed with certain services offered by InformIT. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.informit.com/u.aspx.

Sale of Personal Information

Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents

California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure

Pearson may disclose personal information, as follows:

As required by law.
With the consent of the individual (or their parent, if the individual is a minor)
In response to a subpoena, court order or legal process, to the extent permitted or required by law
To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
To investigate or address actual or suspected fraud or other illegal activities
To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links

This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact

Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice

We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020

Email Address