␡
- Objectives
- Key Terms
- Introduction (1.0.1.1)
- Initial Configuration of a Router (1.1)
- Connect Devices (1.1.2)
- Basic Settings on a Router (1.1.3)
- Verify Connectivity of Directly Connected Networks (1.1.4)
- Routing Decisions (1.2)
- Path Determination (1.2.2)
- Summary (1.4)
- Practice
- Check Your Understanding Questions
This chapter is from the book
Key Terms
This chapter uses the following key terms. You can find the definitions in the Glossary.
- default gateway
- physical topology
- logical topology
- availability
- scalability
- reliability
- Random Access Memory (RAM)
- Read-Only Memory (ROM)
- Non-Volatile Random Access Memory (NVRAM)
- Flash
- process switching
- fast switching
- Cisco Express Forwarding (CEF)
- IP address
- subnet mask
- topology diagram
- addressing table
- statically assigned IP address
- dynamically assigned IP address
- console cable
- terminal emulation software
- switched virtual interface (SVI)
- High-Speed WAN Interface Card (HWIC)
- loopback interface
- directly connected network
- remote network
- Gateway of Last Resort
- metric
- best path
- equal cost load balancing
- unequal cost load balancing
- administrative distance
- routing table