- Introduction
- Changing Drawing Settings
- Drawing with the Line Tool
- Drawing with the Pencil Tool
- Drawing Shapes with the Rectangle and Oval Tools
- Using the Polystar Tool
- Selecting Strokes with the Arrow Tool
- Selecting Strokes and Fills with the Arrow Tool
- Making Selections with the Lasso Tool
- Zooming In and Out with the Magnifying Glass
- Moving Around with the Hand Tool
- Displaying Rulers
- Using Grids and Guides
- Modifying Grid and Guide Settings
- Using Snap Align
- Changing Stroke and Fill Colors
- Creating Custom Colors
- Editing Strokes with the Ink Bottle
- Editing Fills with the Paint Bucket
- Editing Strokes and Fills with the Eyedropper
- Creating Gradients
- Using the Fill Lock
- Using Paint Brush Modes
- Drawing with the Pen Tool
- Drawing Curves with the Pen Tool
- Modifying Shapes with the Arrow Tool
- Modifying Shapes with the Sub-Selection Tool
- Using the Free Transform Tool
- Using Transform Options for Shapes
- Cutting and Pasting Graphics Between Layers
- Working with Graphics on Different Layers
- Distributing Graphics to Layers
This chapter is from the book
This chapter is from the book
This chapter is from the book
Cutting and Pasting Graphics Between Layers
Unless you lock or hide layers, or lock objects, the graphics on all layers are available for editing. You can select objects on one or more layers, cut or copy them, and then paste them all into a single layer. Flash can have only one layer active at a time. When you create and paste graphics, Flash places them on the active layer of a document. You can paste objects in two different ways: Paste In Center and Paste In Place. Paste In Center puts objects in the center of the open Flash window, which might not be the Stage. If you want to paste to the center of the Stage, you need to center the Stage in the open window. Paste In Place puts objects at the same location it had been when you cut or copied it.
Paste Objects Between Layers
Create or open a document with several layers.
Select one or more objects on the Stage.
Flash selects the object's layer in the Timeline.
)
Figure
3.91Click the Edit menu, and then click Cut or Copy.
Select a destination layer in the Timeline.
)
Figure
3.92Click the Edit menu, and then click Paste In Center.
Flash pastes the objects on the Stage in the middle of the active layer.
Use the Paste In Place Command Between Layers
Create or open a document with several layers.
Select one or more objects on the Stage.
Flash selects the object's layer in the Timeline.
)
Figure
3.93Click the Edit menu, and then click Cut or Copy.
Select a destination layer in the Timeline.
)
Figure
3.94Click the Edit menu, and then click Paste In Place.
Flash pastes the objects into their original locations on the Stage in the middle of the active layer.