␡
- Equipment List
- General Guidelines
- Setting Up the Lab
- Practice Lab 1 Exercises Section 1.0: Basic Configuration (10 points)
- Section 2.0: Routing Configuration (25 points)
- Section 3.0: ISDN Configuration (8 points)
- Section 4.0: PIX Configuration (5 points)
- Section 5.0: IPSec/GRE Configuration (10 points)
- Section 6.0: IOS Firewall + IOS IDS Configuration(10 points)
- Section 7.0: AAA (7 points)
- Section 8.0: Advanced Security (10 points)
- Section 9.0: IP Services and Protocol-Independent Features (10 points)
- Section 10.0: Security Violations (5 points)
- Verification, Hints, and Troubleshooting Tips
- Section 1.0: Basic Configuration
- Section 2.0: Routing Configuration
- Section 3.0: ISDN Configuration
- Section 4.0: PIX Configuration
- Section 5.0: IPSec/GRE Configuration
- Section 6.0: IOS Firewall Configuration
- Section 7.0: AAA
- Section 8.0: Advanced Security
- Section 9.0: IP Services and Protocol-Independent Features
- Section 10.0: Security Violations
This chapter is from the book
Section 3.0: ISDN Configuration (8 points)
3.1: Basic ISDN (4 points)
Configure ISDN on R1 and R3. Use network 31.31.31.0/24. Advertise this network in OSPF area0.
Configure redundancy such that if there is a change in backbone database on R3, BRI comes up and all traffic continues normally.
ISDN information:
BRI number on R3 is 99281766 BRI number on R1 is 99281764 Switch-type = basic-ts013
3.2: PPP Callback (4 points)
-
R1 should call back R3 using Tacacs+. Configure static NAT translation on PIX for AAA server behind R6 to achieve this task, as shown in topology diagram Figure 1-1.