Exam Prep Questions
You have a new Windows Server 2008 computer with multiple hard drives. You want to implement RAID1 on the server. What do you need to first?
A.
Enable write catching on the first disk.
B.
Enable write catching on the second disk.
C.
Convert the basic disk to dynamic disks.
D.
Convert the dynamic disk to basic disks.
You have a Windows Server 2008 computer with two hard drives. What type of RAID can you implement to provide fault tolerance?
A.
RAID 0
B.
RAID 1
C.
RAID 5
D.
RAID 1 and 5
Which of the following types of fault-tolerant (RAID) configurations (without using a RAID controller or third-party software) can you set up, using either Disk Management or the diskpart.exe command-line tool under Windows Server 2008? (Choose three.)
A.
RAID 0
B.
RAID 2
C.
RAID 5
D.
RAID 1
E.
RAID 0+1
F.
RAID 10
On which of the following hard-disk configurations can you install a fresh copy of Windows Server 2008? (Choose two.)
A.
On a basic partition
B.
On a dynamic volume that was created from unallocated space
C.
On a dynamic volume that was upgraded from a basic volume
D.
On a basic volume that is part of a removable disk
E.
On a dynamic disk that already has Windows XP Professional installed on it
You have a Windows Server 2008 computer with three hard drives installed. After Windows has been installed, each disk has at least 12GB of available disk space. What can you do to provide fault tolerance data system while maximizing disk space?
A.
Create a striped volume on the second and third disk.
B.
Create a striped volume on all three disks.
C.
Create a striped volume using the second and third disk.
D.
Create a striped volume with parity using all three hard drives.
You have a Windows Server 2008 computer. You want to provide fault tolerance for the volume containing the operating system. Each disk is configured as a basic disk. The operating system is installed on the first disk. What should you do?
A.
Configure a new mirrored volume using disk 0 and 1.
B.
Convert disk 0 to a dynamic disk. Configure a new mirrored volume using disk 0 and 1.
C.
Convert disk 1 to a dynamic disk. Configure a new mirrored volume using disk 0 and 1.
D.
Convert disk 0 and disk 1 to dynamic disks. Configure the two disks as a striped set using disk 0 and 1.
E.
Convert disk 0 and disk 1 to dynamic disks. Configure the two disks as a mirrored volume.
How many primary partitions without an extended partition can reside on a basic MBR disk under Windows Server 2003?
A.
3
B.
4
C.
1
D.
128
Which of the following statements are true about basic disks under Windows Server 2008? (Choose two.)
A.
Basic disks are not supported under Windows Server 2008.
B.
Basic disks that were configured as one disk striping with parity set under Windows NT Server 4.0 are mounted automatically after the server is upgraded to Windows Server 2003.
C.
Basic disks can be formatted only as FAT or FAT32.
D.
You cannot convert dynamic disks back to basic disks without deleting all data and volumes on the disks first.
E.
IEEE 1394 disks can only be basic disks.
You have a Windows Server 2008 computer. What command do you use to convert a basic disk to a dynamic disk?
A.
diskpart basic to dynamic
B.
diskpart convert dynamic
C.
format c: /fs:dynamic
D.
convert c: /fs:dynamic
What command would you use to make an iSCSI volume connect every time you boot your system?
A.
iscsicli AddTarget
B.
iscsicli AddPersistentDevices
C.
iscsicli RemovePersistentDevices
D.
iscsicli ClearPersistentDevices
What command would you use to remove all iSCSI volumes so that they do not connect when you boot your system?
A.
iscsicli AddTarget
B.
iscsicli AddPersistentDevices
C.
iscsicli RemovePersistentDevices
D.
iscsicli ClearPersistentDevices
What command would you use to change a master boot record disk into a GUID partition table disk?
A.
fdisk
B.
format
C.
diskpart
D.
convert
What is the default port used by iSCSI?
A.
TCP port 389
B.
TCP port 443
C.
TCP port 1433
D.
TCP port 3260
You have the following address:
iqn.2534-05.com.microsoft:storage.tape.sys2.123
What type of address is this?
A.
MAC Address
B.
IP Address
C.
iSCSI Qualified Name
D.
Extended Unique Identifier