- Overview of MRTG
- What MRTG Can Help You Do
- Installing MRTG
- Configuring MRTG
- Using MRTG
- Maintaining MRTG
- References and Further Study
This chapter is from the book
This chapter is from the book
This chapter is from the book
3.2 What MRTG Can Help You Do
In the middle of a crisis, or when you are debugging an immediate network problem, MRTG will allow you to view the traffic patterns of many networks at once and quickly determine if one or more is experiencing an abnormal traffic load. The fact that the graphs display the history of the network is key. In practice, it can be difficult to tell from immediate bandwidth and packet-per-second counts alone whether a network is operating normally. If a 100Mb/s link is carrying 85Mb/s of traffic, is this heavy but normal use or is the network straining under an attack? By having the history of the network available, you can look for sudden changes that might account for an operational problem. A denial-of-service attack that attempts to exhaust the available bandwidth on a network nearly always presents as a sudden, sustained increase in traffic levels; the attackers do not have much to gain by slowly ramping up the attack over a period of time.
When you are not tending to an immediate problem, MRTG is useful for studying trends in traffic on your network. It will help you understand how traffic is distributed across your network, plan capacity needs for the future, and so on.
A sample MRTG graph of a day’s worth of network traffic is depicted in Figure 3.1. Note that time progresses to the left, not to the right. This is the default configuration and it is indicated at the bottom of the graph both by the small arrow at the left and by the direction of the time scale. Some MRTG configurations choose to increase time to the right, so be sure examine the graph first. The data at the top of the graph represents the amount of traffic sent into an interface, while the data at the bottom represents the amount of traffic sent out from an interface. You can see that over the past day, this router interface typically received about 20Mb/s of traffic and sent about 10Mb/s. You will also notice that just after 3:00 p.m. yesterday, there was a short spike in traffic out of the interface.
)
Figure 3.1. Sample Daily MRTG Graph.
While MRTG is most often used to collect data from router interfaces, it can also collect traffic data from switches or servers. In this way, you can monitor the bandwidth use of a particular machine. In fact, MRTG can be configured to collect any statistical data that a device makes available via SNMP.