SPECIAL OFFERS
Keep up with new releases and promotions. Sign up to hear from us.
Also available in other formats.
Register your product to gain access to bonus material or receive a coupon.
The Definitive Guide to Petroleum Reservoir Engineering–Now Fully Updated to Reflect New Technologies and Easier Calculation Methods
Craft and Hawkins’ classic introduction to petroleum reservoir engineering is now fully updated for new technologies and methods, preparing students and practitioners to succeed in the modern industry. In Applied Petroleum Reservoir Engineering, Third Edition, renowned expert Ronald E. Terry and project engineer J. Brandon Rogers review the history of reservoir engineering, define key terms, carefully introduce the material balance approach, and show how to apply it with many types of reservoirs.
Next, they introduce key principles of fluid flow, water influx, and advanced recovery (including hydrofracturing). Throughout, they present field examples demonstrating the use of material balance and history matching to predict reservoir performance. For the first time, this edition relies on Microsoft Excel with VBA to make calculations easier and more intuitive.
This edition features
Preface xiii
Preface to the Second Edition xv
About the Authors xvii
Nomenclature xix
Chapter 1: Introduction to Petroleum Reservoirs and Reservoir Engineering 1
1.1 Introduction to Petroleum Reservoirs 1
1.2 History of Reservoir Engineering 4
1.3 Introduction to Terminology 7
1.4 Reservoir Types Defined with Reference to Phase Diagrams 9
1.5 Production from Petroleum Reservoirs 13
1.6 Peak Oil 14
Problems 18
References 19
Chapter 2: Review of Rock and Fluid Properties 21
2.1 Introduction 21
2.2 Review of Rock Properties 21
2.3 Review of Gas Properties 24
2.4 Review of Crude Oil Properties 44
2.5 Review of Reservoir Water Properties 61
2.6 Summary 64
Problems 64
References 69
Chapter 3: The General Material Balance Equation 73
3.1 Introduction 73
3.2 Derivation of the Material Balance Equation 73
3.3 Uses and Limitations of the Material Balance Method 81
3.4 The Havlena and Odeh Method of Applying the Material Balance Equation 83
References 85
Chapter 4: Single-Phase Gas Reservoirs 87
4.1 Introduction 87
4.2 Calculating Hydrocarbon in Place Using Geological, Geophysical, and Fluid Property Data 88
4.3 Calculating Gas in Place Using Material Balance 98
4.4 The Gas Equivalent of Produced Condensate and Water 105
4.5 Gas Reservoirs as Storage Reservoirs 107
4.6 Abnormally Pressured Gas Reservoirs 110
4.7 Limitations of Equations and Errors 112
Problems 113
References 118
Chapter 5: Gas-Condensate Reservoirs 121
5.1 Introduction 121
5.2 Calculating Initial Gas and Oil 124
5.3 The Performance of Volumetric Reservoirs 131
5.4 Use of Material Balance 140
5.5 Comparison between the Predicted and Actual Production Histories of Volumetric Reservoirs 143
5.6 Lean Gas Cycling and Water Drive 147
5.7 Use of Nitrogen for Pressure Maintenance 152
Problems 153
References 157
Chapter 6: Undersaturated Oil Reservoirs 159
6.1 Introduction 159
6.2 Calculating Oil in Place and Oil Recoveries Using Geological, Geophysical, and Fluid Property Data 162
6.3 Material Balance in Undersaturated Reservoirs 167
6.4 Kelly-Snyder Field, Canyon Reef Reservoir 171
6.5 The Gloyd-Mitchell Zone of the Rodessa Field 177
6.6 Calculations, Including Formation and Water Compressibilities 184
Problems 191
References 197
Chapter 7: Saturated Oil Reservoirs 199
7.1 Introduction 199
7.2 Material Balance in Saturated Reservoirs 200
7.3 Material Balance as a Straight Line 206
7.4 The Effect of Flash and Differential Gas Liberation Techniques and Surface Separator Operating Conditions on Fluid Properties 209
7.5 The Calculation of Formation Volume Factor and Solution Gas-Oil Ratio from Differential Vaporization and Separator Tests 215
7.6 Volatile Oil Reservoirs 217
7.7 Maximum Efficient Rate (MER) 218
Problems 220
References 224
Chapter 8: Single-Phase Fluid Flow in Reservoirs 227
8.1 Introduction 227
8.2 Darcy’s Law and Permeability 227
8.3 The Classification of Reservoir Flow Systems 232
8.4 Steady-State Flow 236
8.5 Development of the Radial Diffusivity Equation 251
8.6 Transient Flow 253
8.7 Pseudosteady-State Flow 261
8.8 Productivity Index (PI) 264
8.9 Superposition 267
8.10 Introduction to Pressure Transient Testing 272
Problems 282
References 292
Chapter 9: Water Influx 295
9.1 Introduction 295
9.2 Steady-State Models 297
9.3 Unsteady-State Models 302
9.4 Pseudosteady-State Models 346
Problems 350
References 356
Chapter 10: The Displacement of Oil and Gas 357
10.1 Introduction 357
10.2 Recovery Efficiency 357
10.3 Immiscible Displacement Processes 369
10.4 Summary 399
Problems 399
References 402
Chapter 11: Enhanced Oil Recovery 405
11.1 Introduction 405
11.2 Secondary Oil Recovery 406
11.3 Tertiary Oil Recovery 412
11.4 Summary 433
Problems 434
References 434
Chapter 12: History Matching 437
12.1 Introduction 437
12.2 History Matching with Decline-Curve Analysis 438
12.3 History Matching with the Zero-Dimensional Schilthuis Material Balance Equation 441
Problems 466
References 471
Glossary 473
Index 481