- What Is Spyware and Adware?
- Preventing Spyware and Adware
- What to Do If You Think You’ve Been Infected
- Summary
- Where to Go for More Information
This chapter is from the book
This chapter is from the book
This chapter is from the book
Preventing Spyware and Adware
Adware is mainly an annoyance but can slow down the performance of you computer. Spyware is a larger threat because it can be an invasion of your privacy. You can take four steps to remedy the threat:
- Exercise common sense.
- Block popups.
- Install an antispyware/antiadware program.
- Implement a personal software firewall.
The first three are covered in the sections that follow. Personal software firewalls are covered in Chapter 1.
Exercising Common Sense
The easiest way to avoid dealing with spyware and adware on your computer is the same as for viruses: Do not get them in the first place. Easier said than done, but here are some tips:
- Avoid downloading “free” software programs, screensavers, and any program that comes with strings attached.
- If you are not sure whether there are strings attached, do some quick Internet research on the software program.
- Do not click on popup ads, even to win money from a monkey.
- Do not fall for popups on your computer saying your computer is infected with spyware.
- Ask yourself why something of value is being offered for free. What do they have to gain from giving it to you?
It is almost impossible never to get adware or spyware on your computer. Just like viruses, we have had them, and everyone we know has had them.
Installing a Popup Blocker
The first step in avoiding adware and spyware (and to save yourself a ton of annoyance) is to turn on a popup blocker to stop the endless stream of windows with advertisements popping up on your computer screen while you are on the Internet. You have a couple of options.
Turning On the Internet Explorer Built-In Popup Blocker
If you are running Windows XP Service Pack 2 (SP2), you have a popup blocker already. All you need to do is turn it on. If your version of XP is not SP2, you can acquire it here:
The popup blocker is built in to Internet Explorer. To turn it on, click Tools > Pop-up Blocker > Turn On Pop-up Blocker, as shown in Figure 5-2.
)
That was easy. Periodically, some websites might use popups you want to see, not as ads but as part of the way that website functions to show you information. You can just toggle the popup blocker in your browser off temporarily. Just remember to turn it back on when you leave that website.
When you turn on the popup blocker, the menu option will change to Tools > Pop-up Blocker > Turn Off Pop-up Blocker. You just use the same menu option to toggle the feature on and off.
Installing a Third-Party Popup Blocker Program
If you do not have Windows XP (still running Windows 98SE, 2000, or ME), you do not have the option to upgrade Internet Explorer to receive the built-in popup blocker.
However, several popup blockers are available for free (yes, we know we said not to download free stuff). Pop-Up Stopper from Panicware is a pretty decent one. You can get it here:
After you install it, a little white glove icon will appear in the lower right of your screen (on the running tasks bar). If you double-click the glove, you can toggle Pop-Up Stopper on and off, as shown in Figure 5-3.
)
If the glove is white, Pop-Up Stopper is on. If the glove is “empty” (no color), Pop-Up Stopper is off.
Installing an Antispyware/Antiadware Program
The next step in adware and spyware prevention is to install an antispyware/antiadware program. Figure 5-4 shows how these programs work. They work similarly to antivirus programs.
)
Your computer is scanned for known spyware and adware programs, matching them against a list of known spyware/adware signatures. If detected, you can remove them. If a piece of spyware is not yet in the signature list, it will be missed, again similar to antivirus.
Also similar to antivirus, but not quite there yet in terms of technology (that is, it is pretty new at the time of publication), is the ability to do active scanning, meaning blocking the insertion of adware and spyware into your computer in the first place. This is preferable rather than detecting and deleting it, after it is already on your computer and operating.
You have several options for antispyware/antiadware programs, including the following:
- Installing a freeware program from the Internet
- Installing Windows Defender, a relatively new option
- Enabling the antispyware/antiadware function in a security bundle you already own or plan to buy
The following sections look at each option. Any option will work, but they do have different advantages and disadvantages, so weigh which one is right for you. You might want to install all of them and then pick which one is right for you. Multiple programs for scanning are okay. However, be careful having multiple programs setup for active scanning at the same time because it could affect your computer’s performance.
Free Antispyware/Antiadware Programs
A couple of really good antispyware/antiadware programs are available on the Internet for free. If you have been paying attention at all, you should be saying, “Hey, you told me not to do that.” Well, exceptions apply to every rule.
The basic version of these programs is free. They make money by offering an upgrade to a premium version that has more features and a higher level of service. We look at the basic versions here.
Spybot Search & Destroy
The first is a product called Spybot Search & Destroy from Safer Networking. It is available here for download:
After installing the program, you can double-click the desktop icon to start it. You will see a dialog like Figure 5-5.
)
Clicking Search for Updates downloads the latest signatures over the Internet to your computer so that Spybot has the latest set of spyware/adware knowledge to search with.
Clicking Check for problems scans your computer for known spyware and adware problems. When the scan has completed, you will see a display such as Figure 5-6, showing the spyware and adware programs that were detected on your computer.
)
Clicking Fix selected problems removes all the spyware and adware programs that are checked.
Spybot attempts to remove the selected adware and spyware programs and gives you a report about whether it succeeded, as shown in Figure 5-7.
)
That’s it, pretty easy, but you do have to remember to perform a scan periodically.
If you would rather automate when scans occur, you can do that, too. Follow these steps:
- Step 1. Click the Mode > Advanced option on the toolbar to turn on the more advanced functions of Spybot Search & Destroy.
- Step 2. Click the Settings plus sign on the left side of the control window. Then, click Settings below that. Page down in the panel on the right of the window to a section called Automation, as shown in Figure 5-8.
- Step 3. Under System start, select the following options:
- Automatically run program at system startup.
- Run check on program start.
- Fix all problems on program start.
- Wait a few minutes until starting the check.
- Close program if everything’s O.K.
- Step 4. Under Web update, select the following options:
- Search the web for new versions at each program start.
- Download updated include files if available online.
- Step 5. Click File > Exit to save the settings.
)
Now, each time Windows is started, Spybot will automatically start, download the latest adware/spyware signatures, and start scanning. The scanning looks slightly different, as shown in Figure 5-9. Because many different programs compete for the CPU resources as the computer starts up, it is a good idea to set the startup time to about 4 or 5 minutes after Windows boots.
)
When the scan completes, Spybot automatically removes any detected spyware and adware.
Spybot Search & Destroy is a pretty good antispyware/antiadware program. It is mainly a “sweeper,” meaning it scans and removes spyware programs after they are already there. A few prevention features are starting to appear in Spybot. Check out the Immunize function.
Finally, the good folks at Safer Networking operate today based on donations. So, if you like Spybot Search & Destroy, consider kicking a few euros their way (they are based in Ireland).
Ad-Aware
The next product to consider is called Ad-Aware from Lavasoft (a Swedish company; apparently Europeans hate adware and spyware even more than Americans).
It is fairly similar to Spybot, in that it is a “sweeper” type of program. The basic (personal) version is free, with a more enhanced version available for a small fee. One of the features available in the pay version is Ad-Watch, which offers spyware/adware prevention and blocking before it reaches your computer. Both versions are available here:
After you have installed Ad-Aware, you can access the Ad-Aware main control window by double-clicking the desktop icon. It looks like Figure 5-10.
)
Clicking Check for updates now checks for and downloads the latest signatures from the web. Clicking Scan now triggers a full system scan against the known adware and spyware signatures. When it completes, you receive a report like that shown in Figure 5-11.
)
To remove any detected items, click Next and follow the instructions.
Ad-Aware is another pretty good product. If you try it and like it, consider upgrading to the pay version to get the prevention component, Ad-Watch.
Windows Defender
The next option to consider is called Windows Defender (beta 2), formerly known as Windows AntiSpyware (beta). Defender is a beta version (at the time of this writing) of antispyware/antiadware from Microsoft that integrates with Windows. (Beta means it is still undergoing testing, but you can use it at your own risk.)
Defender can run on Windows XP SP2 and later (or Windows 2000 SP4 and later). It offers both detection (passive scanning) and prevention (active scanning). Windows Defender (beta) is free for Windows users (at the time of this writing).
See the following website to download and try Defender:
After you install Defender, you will see a little gray castle icon running on your taskbar and a corresponding desktop icon. Defender automatically starts every time Windows starts up and stays running in the background. The main Defender control window looks like Figure 5-12.
)
A green status means no threats have been detected. You can adjust some of the settings by clicking Tools > General Settings, as shown in Figure 5-13.
)
Some of the recommended settings you want to checkmark are these:
- Automatically scan my computer (and you specify the frequency, daily or weekly are recommended, and time of day)
- Check for updated definitions before scanning
- Apply actions on detected items after scanning
With these settings enabled, Defender will always automatically get the latest adware and spyware signatures over the Internet, and scan your computer periodically. If a problem is found, you will see a red status appear, as shown in Figure 5-14.
)
Clicking the warning area takes you to a page where you can manually determine what you want to do with the spyware or adware detected, as shown in Figure 5-15.
)
The Action options are Ignore, Remove, or Allow. Unless you need it, select Remove and then Apply Actions. Alternatively, click Remove All if you want to get rid of all of it.
Figure 5-16 shows a list of adware that has been removed by Defender.
)
That covers the passive scanning mode of Defender (meaning detecting, and removing spyware/adware when it is already there). Let’s now look at Defender’s active scanning to see how it can help prevent spyware/adware from being installed in the first place.
Windows Defender runs in the background on your computer. If you click something to install that has spyware or adware associated with it, Defender pops up a warning, such as the example shown in Figure 5-17.
)
You can then avoid installing the software and thereby prevent the adware from getting on your computer. Another cool feature of Defender is the ability to report potential spyware threats back to Microsoft for investigation (so that future versions of Defender can be improved with the latest signatures).
Windows Defender (still in beta, do not forget, but could be production-ready by the time you read this book) seems like a pretty good addition to Windows for security. Adding to that Windows Firewall and Windows Live OneCare antivirus, and it would seem that Microsoft is finally on their way to incorporating much needed security into Windows.
Antispyware/Antiadware in the Security Bundles
A final option available for antispyware/antiadware is that if you decided to buy or already own one of the security software bundles (such as McAfee Internet Security Suite 200x, Symantec Norton Internet Security 200x, Trend Micro PC-cillin Internet Security, or ZoneAlarm Internet Security Suite), all have an antispyware/antiadware component.
See Table 1-1 (Chapter 1) or Table 3-1 (Chapter 3) for the location of the websites to purchase one of the security bundle products.
For these products, consult the User Guide for how to enable the spyware/adware protection.
Figure 5-18 shows one example for enabling antispyware/antiadware in Symantec’s product.
)