- Basic Uses of Route Maps
- Configuring Route Maps
- Looking Ahead
- Summary Table: Chapter 14 Command Review
- Review Questions
- Configuration Exercises
- Troubleshooting Exercise
Summary Table: Chapter 14 Command Review
Command |
Description |
access-list access-list-number {deny | permit} source [source-wildcard] |
Defines a line of a standard IP access list |
access-list access-list-number {deny | permit} protocol source source-wildcard destination destination-wildcard [precedence precedence] [tos tos] [log] |
Defines a line of an extended IP access list |
ip local policy route-map map-tag |
Defines a policy route for packets originated by the router itself |
ip policy route-map map-tag |
Defines a policy route for packets transiting the router |
match interface type number [...type number] |
Matches routes that have their next hop out one of the interfaces specified |
match ip address{access-list-number| name} [...access-list-number| name] |
Matches routes that have a destination address specified by one of the access lists |
match ip next-hop{access-list-number| name} [...access-list-number| name] |
Matches routes that have a next-hop router address specified by one of the access lists |
match ip route-source{access-list-number| name} [...access-list-number| name] |
Matches routes that have been advertised by routers at the addresses specified in the access lists |
match ipv6 address prefix-list{name} |
Matches routes that have a destination address specified by the prefix-list |
match ipv6 next-hop prefix-list{name} |
Matches routes that have a next-hop router address specified by the prefix-lists |
match ipv6 route-source prefix-list{name} |
Matches routes that have been advertised by routers at the addresses specified in the prefix-list |
match length min max |
Matches the level 3 length of a packet |
match metric metric-value |
Matches routes with the specified metric |
match route-type{internal| external[type-1| type-2] | level-1| level-2} |
Matches OSPF, EIGRP, or IS-IS routes of the specified type |
match tag tag-value [...tag-value] |
Matches routes with the specified tags |
ipv6 prefix-list list-name [seq seq-number] {deny ipv6-prefix / prefix-length | permit ipv6-prefix / prefix-length | description text} [ge ge-value] [le le-value] |
Defines an IPv6 prefix list |
redistribute protocol[process-id] {level-1| level-1-2| level-2} [metric metric-value] [metric-type type-value] [match{internal| external 1| external 2}] [tag tag-value] [route-map map-tag] [weight weight] [subnets] |
Configures redistribution into a routing protocol and specifies the source of the redistributed routes |
set level{level-1| level-2| level-1-2| stub-area | backbone} |
Sets the IS-IS level or the OSPF area into which a matched route is to be redistributed |
set default interface type number [...type number] |
Sets the outgoing interface for matched packets when there is no explicit route to the destination |
set interface type number [...type number] |
Sets the outgoing interface for matched packets when there is an explicit route to the destination |
set ip default next-hop ip-address [...ip-address] |
Sets the next-hop router address for matched packets when there is no explicit route to the destination |
set ip next-hop ip-address [...ip-address] |
Sets the next-hop router address for matched packets when there is an explicit route to the destination |
set ip precedence precedence |
Sets the precedence bits in the Type of Service field of matched IP packets |
set ip tos type-of-service |
Sets the TOS bits in the Type of Service field of matched packets |
set metric{metric-value| bandwidth delay reliability loading mtu} |
Sets the metric value for a matched route |
set metric-type{internal| external| type-1| type-2} |
Sets the metric type for a matched route being redistributed into IS-IS or OSPF |
set next-hop next-hop |
Sets the next-hop router address for a matched route |
set tag tag-value |
Sets a tag value for a matched route |