This chapter is from the book
This chapter is from the book
This chapter is from the book
References
1. Geankoplis, C., Transport Processes and Separation Process Principles, 4th ed. (Upper Saddle River, NJ: Prentice Hall, 2003), 99–100.
2. Perry, R. H., and D. Green, Perry’s Chemical Engineers’ Handbook, 6th ed. (New York: McGraw-Hill, 1984), Section 5.
3. Couper, J. R., W. R. Penney, J. R. Fair, and S. M. Walas, Chemical Process Equipment: Selection and Design, 3rd ed. (New York: Elsevier, 2012), ch. 7.
4. Green, D. W., and R. H. Perry., Perry’s Chemical Engineers’ Handbook, 8th ed. (New York: McGraw-Hill, 2008), Section 10.
5. McCabe, W. L., J. C. Smith, and P. Harriott, Unit Operations of Chemical Engineering, 5th ed. (New York: McGraw-Hill, 1993).
6. Bird, R. B., W. E. Stewart, and E. N. Lightfoot, Transport Phenomena, 2nd ed. rev. (New York: Wiley, 2006), 51.
7. Pavlov, K. F., P. G. Romankov, and A. A. Noskov, Problems and Examples for a Course in Basic Operations and Equipment in Chemical Technology (Moscow: MIR, translated, 1981).
8. Levenspiel, O., Engineering Flow and Heat Exchange, 3rd ed. (New York: Springer, 2014), 27.
9. Darby, R., Chemical Engineering Fluid Mechanics, 2nd ed. (New York: Marcel Dekker, 2001), 209.
10. Kittredge, C. P., and D. S. Rowley. “Resistance Coefficients for Laminar and Turbulent Flow Through One-Half-Inch Valves and Fittings,” Trans. ASME 79 (1957): 1759–1766.
11. Haider, A., and O. Levenspiel, “Drag Coefficient and Terminal Velocity of Spheres and Nonspherical Particles,” Powder Technol. 58 (1989): 63–70.
12. Wen, C. Y., and Y.-H. Yu, “A Generalized Method for Predicting the Minimum Fluidization Velocity,” AIChE J. 12 (1966): 610–612.
13. Kunii, D., and O. Levenspiel, Fluidization Engineering, 2nd ed. (Stoneham, MA: ButterworthHeinemann, 1991).
14. Miller, R.W., Flow Measurement Engineering Handbook (New York: McGraw-Hill, 1983).
15. Cheremisinoff, N. P., and P. N. Cheremisinoff, Instrumentation for Process Flow Engineering (Lancaster: Technomic, 1987).
16. Walas, S., Chemical Process Equipment: Selection and Design (Stoneham, MA: Butterworth, 1988).