This chapter is from the book
SRST IOS Dial Plan
When the endpoints enter SRST/E-SRST, a dial plan is required such that in absence of CUCM the router can route calls to/from PSTN/ITSP (SIP provider). Example 5-4 shows a basic dial North America Numbering Plan (NANP) for the SRST gateway to accept incoming calls and enable users to dial emergency, local, national, and international numbers. The configuration also includes routing for incoming calls.
Example 5-4 SRST Router Dial Plan Configuration
SRST-Router(config)# dial-peer voice 100 pots SRST-Router(config-dial-peer)# description all incoming calls SRST-Router(config-dial-peer)# incoming called-number . SRST-Router(config-dial-peer)# direct-inward-dial SRST-Router(config-dial-peer)# port 0/1:23 SRST-Router(config-dial-peer)# forward-digits all ! SRST-Router(config)# dial-peer voice 10 pots SRST-Router(config-dial-peer)# description Local outgoing calls SRST-Router(config-dial-peer)# destination-pattern 9[2-9]...... SRST-Router(config-dial-peer)# port 0/1:23 SRST-Router(config-dial-peer)# forward-digits all ! SRST-Router(config)# dial-peer voice 20 pots SRST-Router(config-dial-peer)# description Long Distance outgoing calls SRST-Router(config-dial-peer)# destination-pattern 91[2-9]..[2-9]...... SRST-Router(config-dial-peer)# port 0/1:23 SRST-Router(config-dial-peer)# forward-digits all ! SRST-Router(config)# dial-peer voice 30 pots SRST-Router(config-dial-peer)# description International outgoing calls SRST-Router(config-dial-peer)# destination-pattern 9011T SRST-Router(config-dial-peer)# port 0/1:23 SRST-Router(config-dial-peer)# forward-digits all ! SRST-Router(config)# dial-peer voice 911 pots SRST-Router(config-dial-peer)# description Emergency calls to 911 SRST-Router(config-dial-peer)# destination-pattern 911 SRST-Router(config-dial-peer)# port 0/1:23 SRST-Router(config-dial-peer)# forward-digits all
The next section describes the CUCM side of configuration to support SRST.