␡
- Defining Seed and Default Metrics
- Redistributing Connected Networks
- Redistributing Static Routes
- Redistributing Subnets into OSPF
- Assigning E1 or E2 Routes in OSPF
- Redistributing OSPF Internal and External Routes
- Configuration Example: Route Redistribution for IPv4
- Configuration Example: Route Redistribution for IPv6
- Verifying Route Redistribution
- Route Filtering Using the distribute-list Command
- Route Filtering Using Prefix Lists
- Using Route Maps with Route Redistribution
- Manipulating Redistribution Using Route Tagging
- Changing Administrative Distance for Internal and External Routes
- Passive Interfaces
This chapter is from the book
Redistributing Subnets into OSPF
Router(config)#router ospf 1 |
Starts the OSPF routing process. |
Router(config-router)#redistribute eigrp 10 metric 100 subnets |
Redistributes routes learned from EIGRP autonomous system 10. A metric of 100 is assigned to all routes. Subnets will also be redistributed. |
NOTE: Without the subnets keyword, no subnets will be redistributed into the OSPF domain. (Only routes that are in the routing table with the default classful mask will be redistributed.) |