␡
- Defining Seed and Default Metrics
- Redistributing Connected Networks
- Redistributing Static Routes
- Redistributing Subnets into OSPF
- Assigning E1 or E2 Routes in OSPF
- Redistributing OSPF Internal and External Routes
- Configuration Example: Route Redistribution for IPv4
- Configuration Example: Route Redistribution for IPv6
- Verifying Route Redistribution
- Route Filtering Using the distribute-list Command
- Route Filtering Using Prefix Lists
- Using Route Maps with Route Redistribution
- Manipulating Redistribution Using Route Tagging
- Changing Administrative Distance for Internal and External Routes
- Passive Interfaces
This chapter is from the book
Redistributing Static Routes
Router(config)#ip route 10.1.1.0 255.255.255.0 serial 0/0/0 |
Creates a static route for network 10.1.1.0/24 exiting out of interface Serial 0/0/0 |
Router(config)#router eigrp 10 |
Starts the EIGRP routing process |
Router(config-router)#redistribute static |
Redistributes static routes on this router into the EIGRP routing process |